|
| MOQ: | 100kg |
| Price: | USD2~13/kg |
| Standard Packaging: | Pallets |
| Delivery Period: | It depends on the quantity to be ordered. |
| Payment Method: | by T/T or L/C, Western Union |
| Supply Capacity: | 5000 tons per year |
Cast Tolerance: unless otherwise ASTM, EN, DIN,ISO, JIS, GB;
Machining tolerance: unless otherwise according to dwg. requirement;
Material Grade: Alloy Steel, Carbon Steel;
Quality Level: As per National Standard & International Standards;
Production Process: Sand Process,Heat-treatment Process;
Maching Process:Including machining process,such as drilling and tapping holes.
Material Grade for Melting Kettles:
| Chemical Composition | C | Si | Mn | P | S | Cr | Mo | Ni | B | Al |
| AS2074/L5B(%) | ≤0.35 | ≤0.6 | 0.5-0.8 | ≤0.05 | ≤0.05 | 1-1.5 | 0.45-0.65 | ≤0.65 | 0.0035 | 0.02-0.03 |
The slag pots can either be manufactured in accordance with a well-tried and proven
concept provided by the commissioner or be customised to the specific requirements
resulting from the operational environment. The range of the available design reaches
from conventional to most advanced buckets. Slag pots are wearing products exposed
to both mechanical and alternate thermal stresses the extent of them depends on the
service conditions.
video
|
|
| MOQ: | 100kg |
| Price: | USD2~13/kg |
| Standard Packaging: | Pallets |
| Delivery Period: | It depends on the quantity to be ordered. |
| Payment Method: | by T/T or L/C, Western Union |
| Supply Capacity: | 5000 tons per year |
Cast Tolerance: unless otherwise ASTM, EN, DIN,ISO, JIS, GB;
Machining tolerance: unless otherwise according to dwg. requirement;
Material Grade: Alloy Steel, Carbon Steel;
Quality Level: As per National Standard & International Standards;
Production Process: Sand Process,Heat-treatment Process;
Maching Process:Including machining process,such as drilling and tapping holes.
Material Grade for Melting Kettles:
| Chemical Composition | C | Si | Mn | P | S | Cr | Mo | Ni | B | Al |
| AS2074/L5B(%) | ≤0.35 | ≤0.6 | 0.5-0.8 | ≤0.05 | ≤0.05 | 1-1.5 | 0.45-0.65 | ≤0.65 | 0.0035 | 0.02-0.03 |
The slag pots can either be manufactured in accordance with a well-tried and proven
concept provided by the commissioner or be customised to the specific requirements
resulting from the operational environment. The range of the available design reaches
from conventional to most advanced buckets. Slag pots are wearing products exposed
to both mechanical and alternate thermal stresses the extent of them depends on the
service conditions.
